NidhiDisclosure: This post contains affiliate links, which means we may earn a commission if you purchase through our links at no extra cost to you.
The result of converting 120 psi to kpa is approximately 827.4 kpa.
Since 1 psi equals 6.89476 kpa, multiplying 120 psi by this factor gives the conversion result. This conversion helps in understanding pressure measurements across different systems, especially in engineering and scientific contexts where kpa is standard.
Conversion Result and Explanation
When converting 120 psi to kpa, you multiply 120 by 6.89476 to get the value in kpa, which is 827.3712 kpa, rounded to four decimal places. This calculation is based on the fixed ratio between psi and kpa, making it straightforward to switch between them depending on the measurement system used.
Conversion Tool
Result in kpa:
Conversion Formula
The formula to convert psi to kpa is: kpa = psi × 6.89476. It works because 1 psi equals exactly 6.89476 kpa, a fixed conversion factor based on the definitions of pressure units. For example, converting 50 psi involves multiplying 50 by 6.89476, resulting in 344.738 kpa.
Conversion Example
- Convert 50 psi to kpa:
- Multiply 50 by 6.89476
- 50 × 6.89476 = 344.738 kpa
- Convert 200 psi to kpa:
- Multiply 200 by 6.89476
- 200 × 6.89476 = 1378.952 kpa
- Convert 75 psi to kpa:
- Multiply 75 by 6.89476
- 75 × 6.89476 = 517.107 kpa
- Convert 10 psi to kpa:
- Multiply 10 by 6.89476
- 10 × 6.89476 = 68.9476 kpa
- Convert 125 psi to kpa:
- Multiply 125 by 6.89476
- 125 × 6.89476 = 861.845 kpa
Conversion Chart
| psi | kpa |
|---|---|
| 95.0 | 655.502 |
| 100.0 | 689.476 |
| 105.0 | 723.45 |
| 110.0 | 757.424 |
| 115.0 | 791.398 |
| 120.0 | 825.371 |
| 125.0 | 859.345 |
| 130.0 | 893.319 |
| 135.0 | 927.293 |
| 140.0 | 961.266 |
| 145.0 | 995.240 |
This chart shows psi values from 95 to 145 and their corresponding kpa conversions. Use it to quickly estimate pressure in kpa when you know the psi value, or vice versa.
Related Conversion Questions
- What is 120 psi in kpa for tire pressure measurements?
- How do I convert 120 psi to kpa for hydraulic systems?
- Is 120 psi equal to how many kpa in typical pressure gauges?
- What is the kpa equivalent of 120 psi in industrial settings?
- How can I convert psi to kpa if I only have a pressure reading of 120 psi?
- What pressure in kpa corresponds to 120 psi in automotive applications?
- If my pressure is 120 psi, what is that in kpa for scientific experiments?
Conversion Definitions
psi
Psi, pounds per square inch, measures pressure based on pounds-force applied over an area of one square inch. Commonly used in the US, it indicates the force exerted on a surface, and is standard in tire pressures, hydraulics, and engineering measurements.
kpa
Kilopascal, abbreviated as kpa, is a metric unit of pressure equal to 1000 pascals. It describes force in newtons applied over square meters, used worldwide in science, weather, and industrial contexts to quantify pressure levels.
Conversion FAQs
How accurate is the conversion from psi to kpa?
The conversion from psi to kpa is highly accurate because it uses a fixed ratio of 6.89476. This ratio is based on precise definitions, ensuring that calculations yield consistent results across applications with minimal variation.
Can I convert kpa back to psi using the same formula?
Yes, to convert kpa back to psi, divide the kpa value by 6.89476. For example, 1000 kpa divided by 6.89476 equals approximately 145 psi, making the conversion straightforward in both directions.
Why is psi used more commonly in some countries than kpa?
Psi remains popular in the US because of historical usage and industry standards, especially in automotive and tire industries. Kpa is preferred internationally, especially in scientific and metric-based systems, leading to regional differences in pressure measurement.
